PowerEdge R230 – UEFI Drivers Issues and L2/L3 Error Mesage

Avago EFI SAS Driver: Unhealthy status reported by this UEFI driver without specific error message(s).

UEFI0116: One or more boot drivers have reported issue(s).  Check the Driver Health Menu in Boot Manager details.

One or more boot drivers require configuration changes.  Press any key to load the driver health manager for configurations.

 

Resolution:

1. Power down system and remove the PERC H330 card.

2. Boot system and enter F2 setup menu and change BIOS UEFI mode to BOOT mode and Exit.

3. Boot system, you’ll get error message. That’s normal. Power down system.

3. Re-install the PERC H330 card.

4. Power up the system and press “X” when boot error prompt for user interaction.

5. Enter F2 setup menu and change BIOS BOOT mode back to UEFI mode. Exit BIOS and it should boot properly without L2/L3 error message

 

 

How to clear NVRAM.

NVRAM_CLR Jumper Reset

 

NVRAM_CLR Jumper Default

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s