Configure Router ephone-dn


Router#conf t


Configure commands:

aaa                Authentication, Authorization and Accounting.

access-list        Add an access list entry

banner             Define a login banner

boot               Modify system boot parameters

cdp                Global CDP configuration subcommands

class-map          Configure Class Map

clock              Configure time-of-day clock

config-register    Define the configuration register

crypto             Encryption module

dial-peer          Dial Map (Peer) configuration commands

do                 To run exec commands in config mode

dot11              IEEE 802.11 config commands

enable             Modify enable password parameters

end                Exit from configure mode

ephone             define ethernet phone

ephone-dn          Configure ephone phone lines (Directory Numbers)

exit               Exit from configure mode

hostname           Set system’s network name

interface          Select an interface to configure

ip                 Global IP configuration subcommands

ipv6               Global IPv6 configuration commands

line               Configure a terminal line

logging            Modify message logging facilities

login              Enable secure login checking

mac-address-table  Configure the MAC address table

no                 Negate a command or set its defaults

ntp                Configure NTP

parser             Configure parser

policy-map         Configure QoS Policy Map

priority-list      Build a priority list

privilege          Command privilege parameters

queue-list         Build a custom queue list

radius-server      Modify Radius query parameters

router             Enable a routing process

secure             Secure image and configuration archival commands

security           Infra Security CLIs

service            Modify use of network based services

snmp-server        Modify SNMP engine parameters

spanning-tree      Spanning Tree Subsystem

tacacs-server      Modify TACACS query parameters

telephony-service  Configure Cisco Unified Communications Manager Express

username           Establish User Name Authentication

vpdn               Virtual Private Dialup Network

vpdn-group         VPDN group configuration

zone               FW with zoning

zone-pair          Zone pair command

Router(config)#ephone-dn ?

<1-288>  ephone-dn tag

Router(config)#ephone-dn 1

Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up

number 62001


%IPPHONE-6-REGISTER: ephone-2 IP: Socket:2 DeviceType:Phone has registered.

Router(config-ephone-dn)#ephone-dn 2

Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up

number 62002



%SYS-5-CONFIG_I: Configured from console by console

%IPPHONE-6-REGISTER: ephone-1 IP: Socket:2 DeviceType:Phone has registered.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s